Search

Component carriers replace flexible printed circuit boards in linear measuring systems

HARTING has developed a component carrier that can be used directly with electronic components eliminating manual assembly and replacing flexible PCBs. Increasing precision and reducing assembly costs.

The component carrier serves as a connecting element between a printed circuit board (PCB) and electronic components (such as LEDs, ICs, photo–diodes or sensors).

Bauteil Traeger
By harnessing this all new HARTING development, electronic components can be fitted directly onto the component carrier, thereby replacing flexible circuit boards.

Component carriers are equipped with measuring sensors for detecting position

The measuring sensors of a scanning head for position detection, for example on a linear slide with guide rails, are often mounted onto flex PCBs. As magnetic, optical or inductive systems, they record the exact position of the slide. To do this the sensors must be positioned exactly at a 90 degree angle. The capability to mount these as precisely as possible improves the accuracy of the measurement results. A second sensor is often installed in the measuring head for redundancy. In addition, the status of the evaluation electronics is displayed using LEDs; these are mounted onto a flex PCB.

Zwei Sensorelemente zur Positionserfassung eines Linearschlittens
Two sensors for detecting the position of a linear slide. Elimination of flex PCBs to implement a 90° angle between the IC and PCB (A). Status LEDs integrated on a small component carrier (B). Simplification of assembly

With HARTING’s component carrier the flexible PCB can be replaced completely. The injection-moulded plastic body already provides very precise 90-degree angles for mounting sensors. The component carrier eliminates the need for time-consuming manual assembly of the flex PCB. In addition, the sensors are positioned more precisely. Another advantage of the component carrier is that the width of the sensor modules can be further reduced to less than 8 mm.

The component carrier with the assembled electronic components, comes in a blister pack for further processing in SMD assembly facilities, and the soldered components are secured with an adhesive so that they cannot detach from their position while in the reflow oven. For more info visit: http://www.3d-mid.ch/

About HARTING 3D-MID

HARTING 3D-MID is offering the complete value chain for 3D-MID technologies from a single source, including development/prototyping of customer-specific products, injection moulding, laser direct structuring, metallisation, assembly and connection technology, as well as final inspection. Its core business is the production of mechatronic components for automobile manufacturing, industry, medical technology and sensor systems. HARTING is the largest supplier of 3D-MID components outside of Asia. HARTING 3D-MID is a business unit of the HARTING Technology Group, headquartered in Espelkamp, Germany.

More news

HARTING revolutionizes 3D printing of LDS materials using Hot Lithography

HARTING AG, a leading provider of 3D MID solutions, and Cubicure GmbH, a pioneer in 3D printing, announce a groundbreaking collaboration to introduce 3D printing of LDS (Laser Direct Structuring) materials. Until now, 3D printing of MID prototypes has been limited due to resolution and material compatibility. Printing methods such as FFF/FDM were affordable but

3D-Circuits drug delivery implant

The Importance of 3D-Circuits in Healthcare

Doctors and clinicians need the best tools. Hospitals need the best supply contracts and equipment. Everyone benefits from new cutting-edge engineering in medical devices and clinical hardware. In the race to fine-tune healthcare systems and deliver the best patient care, technology plays an enormous role. We’ve found that these new types of 3D-Circuits are integral

PCB Expander in Altium Designer

Bridging Dimensions: How HARTING and Altium Revolutionized 3D-Circuits Design

The relentless miniaturization trend in electronics presents a constant challenge: cramming ever-more functionality into ever-shrinking devices. Traditional Printed Circuit Boards (PCBs) are reaching their physical limitations, forcing engineers to seek innovative solutions. The 3D-Circuits technology, which integrates electrical circuits with three-dimensional mechanical parts, offers a promising answer. However, designing these complex structures presented a significant

REGISTER NOW

Never miss 3D-MID news again!

Just register for our Newsletter